Description
CF-530C: The CF-530C allows you to transmit and receive simultaneously on 2 frequency bands – 50 Mhz and 144MHz. Using one or two of the Comet CF-530(C) duplexers, you can connect transceivers and antennas with a single coaxial cable. This duplexer is equipped with filters that prevent TVI on the other side. (insulation of connector is more than 45dB). When using the CF-530C for one frequency, other connectors can remain open, but it is always advisable to connect a dummy load to the “open” connectors. Count on the CF-530C to deliver exceptional transmission efficiency with a VSWR (Voltage Standing Wave Ratio) of less than 1:1.2. This means you can trust this duplexer to maintain excellent signal integrity, minimizing signal loss and maximizing your communications’ clarity.
Comet CF-530C Duplexer compatible with:
FT-818, FT-8900, FT-991A, IC-7100, IC-705 and others.
Older radios include: IC-703, IC-706, IC-7000, FT-857 and others.
When would you use this:
If you want to connect a separate VHF radio and a UHF radio to a dual band antenna
If you want to connect separate VHF UHF antennas to a dual band radio with single output
Specifications:
Bandpass Frequency and Input Loss: 1.3 – 90 MHz / Less than 0.2db, 125 – 470 MHz /Less than 0.3dB
VSWR: Less than 1:1.2
Maximum Input Power: 1.3 – 90 MHz 600 Watts (PEP), 125 – 250Mhz 600 Watts (PEP), 300 – 470 MHz 600 Watts (PEP)
Connectors (CF530): Input Socket – SO-239 Type, Output Leads with 2 x PL259 Fitted
Impedance: 50 Ohms
Weight: 300g
Size: 66mm (W) x 90mm (D) x 26mm (H)
