Description
E-SCN-1000: Professional switching power supply 13.8 Volt with Fan 1000W (75A). For larger calibers of Power Amplifiers (RM KL 703 / HLA-300V + HP) etc. Ultra compact, self-protected.
Features:
AC input range by ON / OFF switch
1000W Single output with parallel function
105℃ output capacitor
100% full-load burning test
Installed with EMI filter, minimum wave
Equipped with high-quality components
Very quiet
Equipped with high-efficiency filters and EMC circuit
Protective measures: short circuit / overload current and voltage / overtemperature
High reliability: low ripple / low noise
Built-in remote sensing function
Built-in ON-OFF remote control
Built-in parallel operation function
Adjustable output voltage by external control 1-5V from (20 ~ 100%)
Adjustable output voltage via internal trimmer (12-14.5 VDC)
Forced air cooling through built-in DC fan
Specifications:
Model E-SCN-1000
DC output voltage: 13.8V
DC output power: 1000W
Rated output current: 75A
Output current range: 0-75A
Ripple and noise: 240mVp-p
Voltage tolerance: 1%
Voltage adjustment range: 5.0% typical adjustment by potentiometer 20 ~ 100%
Setting by external: 1 ~ 5VDC control
Inlet stability: 0.5% Voltage tolerance 1% DC output power 1000W
Effectiveness: 84.00%
AC input voltage range: 90 ~ 130VAC / 180 ~ 260VAC selected by switch, 260 ~ 370VDC
Input current fuse: 10A / 230VAC – fuse 15A / 115VAC AC inrush current
Cold start current: 60A / 230VAC Leakage current 3.5 mA / 240VAC
Overload protection: 110~135% rated output power, Current limiting, delay shut down o/p voltage, re-power on to recover
Over voltage protection: 110 ~ 135% follow to output set up point, shut down o/p voltage, re-power on to recover
High temperature: >100℃ / measure by heat sink, near transformer, Shut down o/p voltage, re-power on to recover
Temperature coefficient: 0.04% /℃ (0~50℃)
Withstand voltage: I/PO/P, I/P-FG:1500VAC
Isolation resistance: I/PO/P, I/P-FG, 100M Ohms / 500VDC / 25℃/ 70%RH
Start, rise, hold time: 800ms, 50ms, 16ms at full load
Special functions: DC voltage adj., remote sensing, remote control, parallel operation (refer to terminal instruction manual)
EMC Standards: Meet FCC Part 15J Conduction class A
Weight: 2.65 kg
Dimensions: 291 x 132 x 68 mm, weight 2.65 kg
NOTE: For safety reasons and to reduce RFI noise we recommend connecting the device to an earthed socket.
