{"id":11841,"date":"2024-07-25T13:33:31","date_gmt":"2024-07-25T03:33:31","guid":{"rendered":"https:\/\/amateurradiosupplies.com.au\/?post_type=product&p=11841"},"modified":"2025-07-31T11:42:27","modified_gmt":"2025-07-31T01:42:27","slug":"fujikura-10d-fb-lite-dia-coaxial-cable-roll-10m","status":"publish","type":"product","link":"https:\/\/amateurradiosupplies.com.au\/index.php\/product\/fujikura-10d-fb-lite-dia-coaxial-cable-roll-10m\/","title":{"rendered":"Fujikura 10D-FB-Lite 7m Roll With N-Plugs"},"content":{"rendered":"

10D-FB-Lite DIA: A high-quality 10D-FB cable (\u00d813 mm) is widely used in cellular amplification systems as well as for switching various RF devices operating at frequencies up to 6 GHz. This cable version has a center conductor made of copper-clad aluminum (CCA).
\nThe main difference between the 10D-FB cable and the cheap RG-58 series is the significant reduction in loss of the RF signal. When using cheap RG-58 cables, unwanted attenuation is already noticeable at 10-15 meters of cable length. With the 10D-FB cable, the cable length can be up to 50 \u2013 100 meters while the end device (repeater, router, or cellular modem) still receives sufficient signal strength. The main advantage of the 10D-FB cable is its very low signal attenuation. Compared to the 5D-FB cable, the 10D-FB has almost 2 times lower signal attenuation, and 4 times lower compared to RG-58. The main disadvantage of the 10D-FB is the complexity of installation due to the thickness of the cable (jacket diameter is 13 mm) and the large bending radius.
\nApproximate cable length: 7m
\nFitted with: N-Male \/ N-Female connectors<\/strong><\/p>\n

Features:
\nMade in Japan: Fujikura
\nFB type low-loss high-frequency coaxial cable for amateur radio
\nLow loss even at high bandwidths due to the use of foamed polyethylene for insulation.
\nIt is lightweight because it uses copper-clad aluminum wire for the internal conductor.
\nThe standing wave ratio is small over a wide bandwidth.
\nThe outer conductor has a double structure of aluminum foil-attached plastic tape and braided material, which provides both shielding properties and flexibility.
\nSince the conductor resistance is small and power loss is minimal, it is suitable for long cable lengths.
\nHigh-quality matte vinyl sheath is used as standard.
\nThe amount of restricted substances under the RoHS Directive is below the specified value.
\nStable transmission characteristics with little change over time.
\nFB type has excellent shielding due to double shield structure, so it is less affected by external noise and minimizes radio wave leakage to the outside.
\nLightweight and braided type with good bending characteristics and easy handling.
\nFBE type is a polyethylene sheath product that emphasizes weather resistance and water resistance when used outdoors.
\nIt is lighter than the conventional 10D-FB and uses copper clad aluminum wire (CA) for the central conductor.
\nImproved reliability of terminal connections. No increase in resistance due to oxide formation when connecting aluminum conductors. The conductor connection method is the same as for copper conductors.
\nSuitable for connecting a base station antenna, repeater, coupler or splitter
\nProfessional HF 13mm cable made in accordance with fire protection requirements (LSZH jacket)<\/p>\n

Applications
\nPacing systems, simple mobile phones, mobile phones, wireless LAN, RFID communications, commercial radio, amateur radio, etc., connection of a wide range of wireless communications and high-frequency devices, and internal wiring<\/p>\n

Specifications:
\nInner conductor: Copper-clad aluminum wire (insulation) foamed polyethylene (outer conductor) aluminum foil attached plastic tape + tin-plated soft copper wire braid (sheath)
\nOperating frequency 10 ~ 6000 MHz
\nPVC Color: Matte black
\nInsulation resistance: 10000 or more M\u03a9-km
\nWithstand voltage: 1000ACV\/1 minute
\nCapacitance: Approximately 84nF\/km
\nCharacteristic impedance: 50\u03a9\u00b12
\nFinished outer diameter: 13.0mm
\nApproximately: 39% lighter than copper conductors (15% CA wire)
\nCost reduction: The length of wire that can be produced from a given weight is about 2.5 times that of copper.
\nVelocity: 81 %
\nTime delay: 3.65 ns\/m
\nMax. operating Voltage: 2000 Vrms\/min<\/p>\n

Structure:
\nInternal conductor: AC (soft copper wire)
\nInsulation: PEF (polyethylene foam)
\nExternal conductor 1: Double-sided aluminum foil-attached plastic tape
\nExternal conductor 2: TAC (tin-plated soft copper wire braid) [= FB, FBE type]
\nSheath: PVC (polyvinyl chloride) [= FV, FB type] PE (polyethylene) [= FBE type]<\/p>\n

Construction Specification:
\nConductor CCA: 3.50 \u00b1 0.02 mm
\nInsulation PE Foam: \u00d810.10 \u00b1 0.10 mm
\nBinder\/Braid Shield: AP+TC: \u00d810.90 \u00b1 0.10 mm
\nJacket Black: LSZH, \u00d813.00 \u00b1 0.15 mm<\/p>\n","protected":false},"excerpt":{"rendered":"

10D-FB-Lite DIA: A high-quality 10D-FB cable (\u00d813 mm) is widely used in cellular amplification systems as well as for switching […]<\/p>\n","protected":false},"featured_media":14815,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[37],"product_tag":[],"class_list":{"0":"post-11841","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-antenna-accessories","8":"first","9":"instock","10":"shipping-taxable","11":"purchasable","12":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/product\/11841","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/comments?post=11841"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/media\/14815"}],"wp:attachment":[{"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/media?parent=11841"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/product_brand?post=11841"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/product_cat?post=11841"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/amateurradiosupplies.com.au\/index.php\/wp-json\/wp\/v2\/product_tag?post=11841"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}